Metal Beam Crash Barrier (W beam & Thrie Beam)
Our range of metal beam crash barriers consists of two variants W-Beam &Thrie Beam as per MORTH Clause 811.3 & IRC: SP: 84, IRC: SP:87, IRC: SP: 99 & IRC: 119 & IRC:5
It is qualified to crash testing ‘Road Restraint System’ as per European EN 1317-2 Standard & results are satisfactory as per the requirements of MORT&H Guideline: RW/NH-29023/02/2019-S&R (P&B), Dated :01st January,2020
Metal Beam Crash Barriers are manufactured by using the Cold Roll Forming Technology with multiple roll forming stations. This enables us to achieve our productivity and targets on regular basis along with greater quality and accuracy.
W-Beam Structural Elements:Morth
- Cold Roll Forming, Piericing, Shearing, Profile Bending, Hot Dip Galvanizing
Sizes/Ranges:
- W-Beam - L 4318 x W 312 x H 81 x T 2.50 to 3.0 mm
- End Section - L 736 x W 312 x H 81 x T 2.50 to 3.0 mm
- Post - L 1100 to 1800 x W 150 x H 75 x T 4.50 to 5.0 mm
- Spacer - L 330 to 360 x W 150 x H 75 x T 4.50 to 5.0 mm
- Bolts & Nuts (Hex/Button head) - M16 x P 2.5 x L 40 m
Raw Materials Specifications:
- W-Beam/End Section - HR Sheet T 2.50 mm as per IS:2062
- Post & Spacer - HR Sheet T 4.50 to 5.0 mm as per IS:2062
- Bolts & Nuts (Hex/Button head) - M16 as per IS:1367 / 136
Surface Finishing:
- Hot Dip Galvanized (550 g/m²) - As per IS
Note:
- Specification of raw materials and surface finishing can be customized to client's needs.
W-Beam Structural Elements: Crash Tested as per EN 1317-part 2
- Cold Roll Forming, Piericing, Shearing, Profile Bending, Hot Dip Galvanizing
Sizes/Ranges:
- W-Beam - L 4318 x W 312 x H 81 x T 2.50 mm
- End Section - L 736 x W 312 x H 81 x T 2.50 mm
- Post - L 1400 x W 125 x H 65 x Lip 25 x T 4.0 mm
- Bolts & Nuts (Button head) - M16 x P 2.5 x L 40 m
- Rectangle washer - 105 X 4.0 x 4 mm thk
Raw Materials Specifications:
- W-Beam/End Section - HR Sheet T 2.50 mm as per IS:2062
- Post - HR Sheet T 4.0 mm as per IS:2062
- Bolts & Nuts (Button head) - M16 as per IS:1367 / 136
Surface Finishing:
- Hot Dip Galvanized (550 g/m²) - As per IS
Note:
- Specification of raw materials and surface finishing can be customized to client's needs.
Thrie-Beam Structural Elements: Morth
- Cold Roll Forming, Piericing, Shearing, Profile Bending, Hot Dip Galvanizing
Sizes/Ranges:
- Thrie-Beam - L 4318 x W 502 x H 81 x T 2.50 to 3.0 mm
- End Section - L 760 x W 502 x H 81 x T 2.50 to 3.0 mm
- Post - L 2000 to 2100 x W 150 x H 75 x T 4.50 to 5.0 mm
- Spacer - L 550 x W 150 x H 75 x T 4.50 to 5.0 mm
- Bolts & Nuts (Hex/Button head) - M16 x P 2.5 x L 40 mm
Raw Materials Specifications:
- Thrie Beam/End Section - HR Sheet T 2.50 to 3.0 mm as per IS:2062
- Post & Spacer - HR Sheet T 4.50 to 5.0 mm as per IS:2062
- Bolts & Nuts (Hex/Button head) - M16 as per IS:1367 / 1364
Surface Finishing:
- Hot Dip Galvanized (550 g/m²) - As per IS
Thrie-Beam Structural Elements: Crash Tested Crash Tested as per EN 1317-part 2
- Cold Roll Forming, Piericing, Shearing, Profile Bending, Hot Dip Galvanizing
Sizes/Ranges:
- Thrie-Beam - L 4318 x W 502 x H 81 x T 2.50 mm
- End Section - L 760 x W 502 x H 81 x T 2.50 mm
- Post - L 1700 x W 125 x H 65 x Lip 25 x T 4.0 mm
- Bolts & Nuts (Button head) - M16 x P 2.5 x L 40 mm
- Rectangle washer - 105 X 4.0 x 4 mm thk
Raw Materials Specifications:
- Thrie Beam/End Section - HR Sheet T 2.50 as per IS:2062
- Post - HR Sheet T 4.50 to 5.0 mm as per IS:2062
- Bolts & Nuts (Hex/Button head) - M16 as per IS:1367 / 1364
Surface Finishing:
- Hot Dip Galvanized (550 g/m²) - As per IS
MORE PRODUCTS
Discover our extensive range of products